Trowelling is a work phase where the right tool has a big impact on both the speed of work and the final result. Concrete, screed, and plaster surfaces require different properties, and the same trowel is not the best solution for all work stages.
When choosing a trowel, consider at least the material to be worked, the size of the surface, the work phase, and the desired final result.
The material and stiffness of the trowel blade also matter. A lightweight urethane trowel behaves differently from a hard polyurethane trowel or a traditional wooden float.
In this guide, we will go through the most common options and their applications.
Quick Guide to Choosing Trowels
| Work / Application | Suitable Tool | Example |
|---|---|---|
| Trowelling and levelling cement and screed surfaces | Lightweight urethane trowel | E. Vuorio Hansahierrin |
| Working and compacting concrete and screed floors | Hard polyurethane trowel | E. Vuorio Extrahierrin |
| Traditional trowelling of wall and floor surfaces | Wooden float | E. Vuorio Iroko-hierrinlatta |
| Applying plaster and trowelling the surface | Wooden render float | E. Vuorio Iroko-vetolauta |
| Straightening large plastered and screeded surfaces | Long straight edge | E. Vuorio Soka |
| Areas around pipes and penetrations | Shaped special trowel | Näsin pipe backing trowel |
The table provides a starting point for selection. The manufacturer's work instructions for the mortar, screed, or other material used always define the material-specific working method and the correct timing for trowelling.
1. Hansahierrin – a general-purpose trowel for cement and screed surfaces
E. Vuorio Hansahierrin is a lightweight urethane trowel for trowelling cement and screed materials and levelling surfaces.
Its light construction makes it a good option when a surface is worked extensively and tool control is important.
The Hansahierrin is available in several sizes. A smaller size provides precision, while a larger trowel speeds up the handling of large surfaces.
For example, the E. Vuorio Hansahierrin 14 × 28 cm serves as a good general-purpose size, while the 24 × 48 cm is more suitable for larger open surfaces.
When Hansa?
Choose Hansahierrin when:
- you are working on a cement or screed surface
- you want a lightweight tool
- the surface requires levelling and trowelling
- the work involves a lot of repetitive motion.
2. Extrahierrin – a more robust option, especially for floors
When a harder and more robust tool is needed, the alternative is the E. Vuorio Extrahierrin.
The Extra is made of hard polyurethane and is particularly suitable for floor work and for working and compacting concrete and screed surfaces.
Its harder construction gives the tool more rigidity when the surface needs to be worked more forcefully.
A good general size is, for example, the E. Vuorio Extrahierrin 14 × 28 cm. For larger floor areas, a wider model can be used to speed up the work.
When Extra?
Choose Extrahierrin especially when:
- it is floor work
- you are working on a concrete or screed surface
- you need a hard and robust trowel
- the surface needs to be compacted
- the tool needs good wear resistance.
In short: Hansa is a lighter general-purpose trowel, while Extra is a more robust option, especially for floor work.
3. Iroko-hierrinlatta – a traditional wooden option
Not all surfaces are worked with a urethane trowel.
The E. Vuorio Iroko-hierrinlatta is a wooden tool for trowelling walls and floors. A wooden trowel behaves differently on the surface than a urethane or polyurethane trowel and remains a basic tool for many professionals in plaster and mortar work.
For example, the E. Vuorio Iroko-hierrinlatta 14 × 25 cm is a compact and easily manageable general model.
Trowelling with an Iroko float is often part of the surface working process and not necessarily the final finishing stage.
When Iroko-hierrinlatta?
A good option when:
- working on a plastered or mortared surface
- it is a wall or floor
- a traditional wooden working surface is desired
- trowelling is part of surface preparation.
4. Vetolauta – for applying and trowelling material
A trowel and a render float are similar, but the render float has a broader purpose.
The E. Vuorio Iroko-vetolauta is suitable for trowelling walls and floors, as well as for applying plaster material, for example.
For example, the E. Vuorio Iroko-vetolauta 20 × 30 cm offers a sufficiently large working surface for efficient material handling.
A render float is a good option when the same tool is used to both apply and work the material.
When Vetolauta?
Choose a render float when:
- applying plaster material
- working on a wall or floor surface
- you want to combine material application and trowelling in the same work phase.
5. Soka – for levelling large surfaces
When moving to large plastered and screeded surfaces, a regular hand trowel is not always the most efficient tool.
The E. Vuorio Soka is a long tool for straightening and levelling large surfaces. Its long working surface covers a larger area simultaneously and helps to control the major lines of the surface.
For example, the E. Vuorio Soka Iroko 120 cm with metal edge is suitable for large plastering and screeding jobs.
The Soka does not replace a smaller trowel; instead, it is used for a different work phase. A large surface can first be straightened with a long tool, and more precise work can then be done with a smaller trowel.
When Soka?
Choose Soka when:
- working on a large wall or floor surface
- doing plastering or screeding work
- the surface needs to be straightened over a large area
- a long working surface helps with the flatness of the surface.
6. For special applications, a special tool saves time
Around pipes, penetrations, and other tricky spots, a regular trowel or spatula can be clumsy.
In such cases, a specially designed tool speeds up work and improves control.
The Näsin pipe backing trowel is a good example of this. Its shape makes it easier to handle screed or mortar in places that are difficult to reach with a regular trowel.
The importance of a special tool is evident precisely in small work stages: the work itself may not be extensive, but with the wrong tool, a disproportionate amount of time can be spent on it.
Trowel size selection – small gives control, large gives speed
Within the same trowel type, the choice of size primarily affects work control and speed.
A small trowel is well suited for small surfaces, edges, and detailed work.
A medium-sized trowel is usually the most versatile option and works well for general use.
A large trowel speeds up work on large and open surfaces because a larger area is covered with one stroke.
For professional work, it is often worthwhile to carry several sizes. This allows the tool to be changed according to the surface and work phase, instead of trying to do everything with the same trowel.
Timing of trowelling is as important as the trowel itself
Even the right trowel will not produce a good result if the surface is worked at the wrong stage.
The mortar, concrete, or screed must have reached the appropriate workability for the material before trowelling. Working a surface that is too wet can unnecessarily alter the surface, while material that has hardened too much is difficult to trowel effectively.
The correct timing is affected by factors such as:
- the material used
- layer thickness
- substrate
- temperature
- air humidity
- ventilation.
Always follow the material manufacturer's work instructions, including regarding the timing of trowelling.
A professional's trowel is chosen according to the work phase
A trowel should not be chosen just based on what happens to be in the toolbox.
A good starting point is to ask three questions:
1. What material am I working with?
Concrete, screed, cement surface, or plaster mortar?
2. What am I doing?
Levelling, compacting, trowelling, applying, or straightening a large surface?
3. How large is the surface?
A small working area requires control, a large surface efficiency.
Based on these, the choice becomes clearer:
For light trowelling of cement and screed surfaces → Hansa
For robust floor, concrete, and screed work → Extra
For traditional trowelling of plastered and mortared surfaces → Iroko float
For applying and trowelling plaster → Iroko render float
For levelling and straightening large surfaces → Soka
Around pipes and penetrations → Näsin pipe backing trowel
The right tool makes the work phase faster
For a professional, the most important function of a tool is to help perform the work in a controlled, efficient, and consistently high-quality manner.
The difference between a small and large trowel, hard and lightweight material, or a standard and specially shaped tool may seem small in a single work movement.
When the same movement is repeated hundreds of times during a workday, the difference is no longer small.
The right trowel for the right work phase reduces extra work, makes surface control easier, and helps complete the job faster.
C.E. Lindgren's E. Vuorio and Näsin ranges offer trowels and special tools designed for professionals in plastering, concrete, and screed work. Products are available from C.E. Lindgren's retailers.