The choice of a tile trowel directly affects the adhesion of the tiles, the smoothness of the work, and the durability of the final result. However, the correct notching is not determined solely by the size of the tile. The structure of the tile's backing, the evenness of the substrate, the adhesive mortar used, and the installation location also influence how much mortar is needed.
For a professional, the tile trowel is one of the most important tools for tiling. Its purpose is not only to spread the adhesive mortar but to form even mortar ridges that, when the tile is installed, press together to create the most comprehensive adhesion surface possible.
Therefore, the most important question in choosing the right tile trowel is ultimately not:
“What size is the tile?”
but:
“Will this notching achieve sufficient mortar coverage in this particular application?”
Tile size provides a good starting point
As tile size increases, a larger notching is usually required.
A small, flat-backed wall tile can be installed with less mortar than a large floor tile or large-format tile. Under a larger tile, the mortar must be able to conform to both the substrate and the contours of the tile's backing to achieve sufficient adhesion.
As a rough guide, consider the following:
| Tiling situation | Typical starting point |
|---|---|
| Small tiles and very even substrate | 3–4 mm notching |
| Small and medium-sized tiles | approx. 6 mm |
| Medium and larger tiles | approx. 8 mm |
| Large floor tiles | approx. 10 mm or larger |
| Large-format tiles / installations requiring a lot of mortar | large square or R-notching |
However, the table should not be used as an absolute sizing guide. The final choice is always made based on the tile, the substrate, and the adhesive mortar used.
The adhesive mortar manufacturer's product-specific work instructions are always paramount.
The tile backing can change the choice
Two tiles of the same size do not necessarily require the same tile trowel.
The back of the tile may have, for example, deep grooves, raised patterns, or a honeycomb structure. The stronger the back profile, the more adhesive mortar is needed to fill the areas between the tile and the substrate.
A smooth-backed tile can therefore work with a smaller notching than a heavily profiled tile of the same size.
This is particularly emphasized with large floor tiles and natural stones.
The evenness of the substrate also matters
A tile trowel is not intended to replace substrate leveling.
The more even the substrate, the more controlled the mortar layer can be formed. On an uneven substrate, the thickness of the mortar layer varies, and achieving sufficient adhesion becomes more difficult.
Large tiles further emphasize the importance of substrate evenness.
Therefore, especially in large-format tiling, good work begins even before the first stroke of the tile trowel: the substrate must be sufficiently flat for the application and tile size.
Adhesive mortar affects notching
The properties of the mortar also affect the choice.
Adhesive mortars differ, for example, in composition, aggregate size, spreadability, and the thickness at which they can be applied. A more fluid large-format tile adhesive behaves differently from a stiffer wall adhesive.
For this reason, the same tile trowel does not automatically suit all adhesive mortars.
At least the following should be checked from the adhesive mortar manufacturer's instructions:
- recommended notching
- allowed layer thickness
- mortar open time
- suitability for the tile type used
- possible requirement for back buttering (double spreading).
For example, Kiilto instructs to choose the size of the spreading trowel's teeth according to the tile size, adhesion surface, and for some products, also the substrate.
Check mortar coverage – it tells you if the trowel is correct
The best way for a professional to ensure the suitability of the tile trowel is simple:
lift up a newly installed tile and check its back.
The adhesive mortar must press adequately onto the bottom of the tile, and there should be no unnecessary voids under the tile.
Kiilto states in the instructions for several adhesive mortars that the target adhesion surface for wall tiles is approximately 70–75% and for floor tiles 80–90%. For outdoor areas, the goal is complete mortar coverage. For large-format tiles and demanding applications, the requirements can be even higher.
If the coverage is insufficient, the solution could be, for example:
- larger notching
- a different notching profile
- checking the mortar composition
- correcting the substrate evenness
- spreading mortar also on the back of the tile.
E. Vuorio RST tile trowels for professional use
C.E. Lindgren's range of E. Vuorio RST tile trowels is designed for professional application of mortar and adhesives.
The range includes various notchings from small tooth sizes to large square and R-notchings. The RST structure, rigid frame, and precise notching help keep mortar application even, even in continuous construction site use.
Smaller notching – for precise mortar quantities
Smaller notchings are suitable for situations where the tile and substrate are even, and a large mortar layer is not needed.
Example from the range:
E. Vuorio RST 4 × 4 × 4 mm, 50 cm – product number 4327
A 50 cm wide tile trowel enables efficient spreading over a larger area. The product is made of stainless steel and designed for professional use.
6 and 8 mm – versatile sizes
6 × 6 mm and 8 × 8 mm notchings are useful in many common tiling jobs.
As the tile size increases or the back of the tile becomes more profiled, switching to a larger notching increases the amount of mortar applied.
The E. Vuorio RST series has several notchings and trowel widths, allowing the tool to be chosen according to both the required amount of mortar and the working area.
10 mm and R-notchings – when more mortar is needed
Large floor tiles and more demanding installations often require a larger amount of mortar.
For example, Kiilto recommends a 10 mm semicircular notched trowel for large floor tiles in its work instructions, and for smaller notching, double-sided mortar spreading.
The E. Vuorio range also includes R-notchings designed for larger mortar quantities.
For example:
E. Vuorio RST R10/20, 50 cm – product number 4375
The large R-notching creates a generous mortar bed for large floor tiles and applications requiring a thicker mortar bed.
The range also includes an even larger one:
E. Vuorio RST R15/20, 40 cm – product number 4395.
However, a larger notching does not automatically mean a better installation. The goal is to use a sufficient but controlled amount of mortar.
28, 40, or 50 cm wide tile trowel?
Notching determines the amount of mortar, but the width of the tool also affects work efficiency.
A 28 cm trowel is agile and easy to handle. It is well suited for walls, smaller spaces, and more precise work.
A 40 cm trowel offers a good compromise between working speed and manageability.
A 50 cm trowel allows a large surface area to be combed in one go and is especially suitable for large floor and wall surfaces.
For a professional, the advantage of a wider tool is reflected in working time: the same surface can be treated with fewer strokes.
What about Näsin notched spreading trowels?
C.E. Lindgren's range also includes Näsin notched mortar and adhesive spreading trowels, such as A4 and A5 notchings.
For example:
Mortar spreading trowel A4 Näsin 50 cm – N3437
as well as Näsin models available with A5 notching, such as:
Näsin A5 40 cm – N5435
Näsin A5 60 cm – N5438.
A- and B-type notching markings relate to different spreading materials and applications than the 6 × 6, 8 × 8, or 10 × 10 mm notchings commonly used in tiling. Therefore, the tool should not be chosen based solely on the designation, but according to the notching specified by the manufacturer of the adhesive or glue mass used.
For large-format tiles, back buttering may be necessary
As tile size increases, a larger tile trowel alone does not solve everything.
In demanding applications, adhesive mortar can be applied to both the substrate and the back of the tile. The goal is to achieve the most uniform adhesion surface possible and minimize empty spaces under the tile.
Kiilto recommends double-sided mortar spreading, for example, with large tiles in certain situations and in outdoor areas to achieve complete adhesion.
Good rule of thumb: choose based on the result, not just tile size
When choosing a tile trowel, tile size can be used as a good starting point, but a professional should always evaluate the overall picture:
1. Tile size
Larger tiles generally require more mortar.
2. Tile backing shape
A strongly profiled backing increases the need for mortar.
3. Substrate evenness
The more even the substrate, the better the mortar layer can be controlled.
4. Adhesive mortar
Always follow the mortar manufacturer's instructions.
5. Application area
Wall, floor, wet room, outdoor area, and high-stress applications place different demands.
6. Actual mortar coverage
At the beginning of the installation, remove a tile and check that the adhesion is sufficient.
The right tool makes work faster and the result more reliable
For a professional, a tile trowel is much more than a piece of notched steel.
A correctly sized and good quality trowel helps to dispense mortar evenly, speeds up the handling of large surfaces, and makes adhesion more predictable.
The right notching is not the one that looks suitable in a table – but the one that achieves the correct amount of mortar and sufficient adhesion surface with the given tile, substrate, and adhesive mortar.
C.E. Lindgren's E. Vuorio and Näsin ranges offer spreading tools designed for professional use for various materials and work methods. The products are available from C.E. Lindgren's retailers.